The first on a metal tile. Roof device

How can I paint the walls on the balcony. Painting the balcony from the inside: what to consider and what paint to choose? With or without plaster

The crown of finishing work, which can emphasize the taste of the owner, is rightfully a painting for the balcony, correctly selected and skillfully applied. Such a coating gives an elegant appearance to building materials that are quite unsightly, protects them from the sun and moisture, and allows you to quickly change the color scheme of style without a lot of cost.

Preparatory operations

   For outdoor use, choose a paint that is resistant to temperature extremes and light

Before you start painting the balcony, you must go through two phases of preparation - theoretical and practical.

The theory is to determine the conditions, the choice of suitable compositions for application, giving a good result of maintaining their characteristics during long-term service.

Practical training comes down to preparing the surfaces on which the selected material is applied. The paintwork for the wall on the open-type balcony should be for outdoor use (waterproof, frost-resistant).

The insulated loggia is painted based on the possibilities of surface care. In any case, the paint must be UV resistant.

Surface treatment


  Types of facade paints

There are a lot of different paint compositions on sale, but they begin to determine how to paint the balcony with the materials on which they will be applied:

At the beginning, the painting area is cleaned as best as possible from dust, rust, old building compounds. For this purpose, the entire available set of tools is used: a rotary soft brush installed in a drill, a scraper, a manual metal brush, sandpaper. Solvents, alcohols are used on metal surfaces.


  From fungus and mold, be sure to process

If the materials are affected by fungus, mold, they are treated with antibacterial impregnations. Moss is etched with an alkali solution.

The next operation is leveling (putty, primer). Sinks in concrete do not putty, but are rubbed with cement mortar. The wood is treated with protective impregnation.

In some cases, it is advisable to disassemble the wall cladding, clean and paint its parts separately, and then reassemble. Then it will maintain the relief of the borders, it will not look like a bucket drenched (for example, a wooden lining).

Formulations for external use can evaporate harmful components (epoxies) when heated. Inside a closed balcony, it is not advisable to use them.

Drawing on old paints

It often happens that the choice comes down to what color to paint the balcony to refresh the atmosphere. It is not always necessary to completely remove old layers, but you need to choose a new paint that is chemically compatible with the base.

So that even a minor innovation does not spoil everything, at the preparatory stage they select the product brand:

Paintthe old
newXBKOAKWater despSilicateMAPFHP
prechlorinated vinyl chlorideyesnonoyesnoyesyesyes
organic creameryyesyesnononoyesyesno
acrylic AKyesyesyesyesnoyesyesyes
water dispersibleyesnoyesyesnoyesyesno
silicatenonononoyesnonono
oil MAyesnoyesyesnoyesyesno
pentaphthalic PFyesyesyesyesnoyesyesyes
chlorosulfonated polyethylene HPyesyesyesnonoyesyesyes

Solvents are also chosen according to the basis of the paint composition.

It is necessary to purchase materials from verified manufacturers with all the necessary information printed on the bank (bucket) of goods. Otherwise, a completely different chemistry may appear inside.

Clearance approach

Even if it is planned to paint all the elements of the balcony in one color, it is better to first consider several options, take into account the nuances of the future atmosphere of the room.

Extensive glazing makes it important to position the front wall relative to the cardinal points.

When oriented to the south-west, the sun warms up the internal volume for the entire second, hottest summer, half a day until sunset. So, you need to choose a light shade that reflects light. In addition, the material is coated with a vapor-permeable composition so that moisture is removed and does not accumulate in the pores of building mixtures. Water-based and acrylic paints have such characteristics.

The north side is illuminated by a reflected stream, so the painted element will not be very hot. In this case, film-forming enamels, varnishes are appropriate.

Plastic cladding components protect with reflective, light tones - the dark color accumulates heat, the plastic can warp.

Consistently choosing materials, they decide how to paint the balcony outside. The basic requirements for the characteristics of the paint are already described above, it remains to choose a color that does not violate the harmony of the entire facade of the building.

The style of the design decision, how to paint the walls, can be chosen to the taste of the owner: from urbanistic minimalism to the avant-garde riot of color transitions. The classical approach adheres to the following rule (not related to drawings, panels, frescoes):

The basic background consists of more than 3 colors. Black and white colors are not included in the calculation.

Application Technique

Planes, angles, thin details, complex surfaces cannot be processed with the same tool. Better to cook for work:

  • paint roller with interchangeable nozzles;
  • wide brush;
  • narrow flecik.

A uniform layer is achieved using a spray gun. With a brush, rub the composition in smooth movements from top to bottom, to the right - to the left. Apply the composition sequentially, without gaps. Otherwise, even the same paint in the light may look different. On how to prepare a balcony for painting, see this useful video:

Each painted area is checked for gaps, streaks, adhering grains, bristles, bursting air bubbles.

Do not hope that a thin film can protect steel from corrosion for a long time. Mortgages, protruding reinforcement, the fence is first covered with a primer on rust. Wooden parts are saturated with drying oil.

For work, it is preferable to choose a day without rain or heat. The surface temperature should not be lower than + 10 ° С. Direct sunlight in the drying period is undesirable.

Shade game

Modern manufacturers widely apply the practice of selling their products using the technology of introducing colored pigment into a white base directly on the trading floor. The client selects the shade according to the catalog and in a few minutes receives what he wants.

The same result can be obtained at home, using a drill with a nozzle or patiently kneading the bar.

To obtain a solid color for large areas, you must immediately take a large bucket for diluting the dye at the base. Transitions of tones of different saturations of one color can be selected in small baths (it is inconvenient to knead directly in the tray). See how to mix color with paint in this video:

The economical consumption of the coating by reducing the thickness of the applied layer is obtained if the primer is tinted with a primer.

Modern interior designers are actively using balcony loggias as an independent thematic room. They successfully organize a workplace or relaxation room. The main thing is to determine the style and decide what color to paint the balcony.

Before you paint the balcony inside with your own hands, we will understand the pros and cons of finishing work and talk about how to paint it technologically correct.

The pros and cons of painting

Painting a balcony is an affordable and easy way to upgrade. Paint and varnish material can be picked up at a hardware store, and a variety of prices makes it affordable for most buyers. But paint for the balcony has disadvantages:

the coating will quickly become unusable if the surface is not prepared correctly before application;

  • some types of paint burn out in the sun;
  • painting the walls on the balcony, do only on a dry surface.

When choosing a material, take into account the features of use. Only then is the desired result achieved that will please the eye.

Color selection

Wall painting on the balcony begins with a choice of colors.

Which shade is better

First you need to decide on the intended use of the loggia. If this is a place for work or leisure, then it is better to use calm, unobtrusive shades. But, if there is a children's play area or an exotic room on the balcony, then here the choice of color is limited by imagination.

Wall paint on the balcony is chosen by color and color fastness. Not all shades can withstand direct sunlight. Many in the sun burn out. For example, white color turns yellow over time, and black becomes faded.

Bright shades used in the form of accents. With their help, the space is divided into a working area and recreation area.

In any case, choosing how to paint the walls on the balcony, proceed from their own desires and capabilities.


Types of Coatings

To decide what paint to paint the balcony inside, first pay attention to the varieties of modern coatings. Hardware stores abound in paints and varnishes. For the decoration of the balcony use the following types of coatings:

Aqueous emulsion (water-based dyes). But they have low resistance to abrasion, unstable to moisture and temperature extremes.

  1. Acrylic This type of paint leads in sales. They are made on a water basis. Acrylics are resistant to abrasion, carry moisture and direct sunlight. Preserve color for a long time. Service life not less than 8 years.
  2. Alkyd. They are made using synthetic resins. Such coatings are moisture resistant, tolerate mechanical stress and ultraviolet. But, despite these qualities, the use of such paints on the walls is not always practiced, as they have a pungent smell.
  3. Latex. Mask the base due to the formation of a waterproof film on the surface of the wall. Due to the poor tolerance of ultraviolet radiation, they are not recommended for use on the sunny side of the house.
  4. Silicone Such paints hide minor cosmetic defects on the walls. The composition of the funds includes antibacterial additives that prevent the formation of mold. This type has the longest life - 20 years.
  5. Silicate. Coatings based on liquid glass, with the addition of mineral components that enhance strength and adhesion. They are resistant to ultraviolet, mechanical and chemical effects. Pass steam well. Drying time is 24 hours.


An important indicator of paint is the ability to pass steam. Moisture is not collected inside and does not have a destructive effect. Surfaces painted with this composition breathe.

Which of these paints is suitable for a balcony for painting

In addition to color and technical characteristics, a factor when choosing a paint is its place of operation. If the glazed balcony is painted, then they are guided by the coatings for interior decoration, and if it is open, then use facade paint.

How to paint a balcony

Cosmetic repairs of the balcony loggia are carried out in several stages:

  1. Start and finish puttying.
  2. Primer.
  3. Painting.

Work begins with cleaning the walls. Before painting on surfaces there should be no mold, dirt, dust and cobwebs. To quickly tidy the walls, it is recommended to use alkaline solutions. They can be used to treat concrete, wood and brick substrates.

Whatever the walls, it is advisable to remove minor defects on them before painting. In preparation, two types of putty are used:

  1. Starting - for the base masking pit and crack layer.
  2. Finishing - for smoothing walls.

If the balcony is in poor condition, then the use of starting putty will not give the expected result. In such cases, it is recommended to finish it from the inside with plaster first and then with putty.

The last stage of preparing a balcony for painting is a primer. Its application increases the adhesion of the material to the surface.

When facing internal or external walls with a metal sheet, staining is carried out using paints for metal. They protect it from corrosion.

When replacing the type and color of paint, the wall is cleaned of the old layer, and only then proceed to the processing and painting of the walls. If the composition does not change, then after applying the primer to the previous layer, they proceed to painting.

Putting paint on the wall is the most budgetary option for major or preventive maintenance of the room. However, you should not assume that if the option is inexpensive, then it will turn out to be ugly or poor-quality. The modern market provides the consumer with a huge selection of paints of all colors and shades, made on any basis and suitable for use in any climatic conditions.

Another advantage of painting walls is the simplicity of this repair, it is not very dirty, and the result depends only on the flight of your imagination. The main advantage is that they are very easy to use - if you carry out the preparatory work correctly, do not skimp on building materials, then the finished wall will serve you for many years, without requiring preventive intervention. Surfaces treated with paint are easily washed with soapy water and a soft cloth, and dry quickly. High-quality paint does not fade and will please your eye for a long time.

Introduction

Preparatory and painting work should be carried out in well-ventilated areas in order to minimize the negative impact on your health and the health of your loved ones. Do not allow children or animals into the work area, but use protective clothing such as gloves, a respirator and plastic glasses. Keep in mind that if paint gets on the fabric of your clothes, it most likely does not wash, so use clothes that you will not mind throwing away.

Surface preparation

Before applying the paint, its surface must be carefully prepared. Below will be presented the technology of preparing the working area and carrying out repair or maintenance work.

If you carry out maintenance work, then the floor near the workplace should be lined with old newspapers. This will ensure that excess building materials get on a clean surface, which saves you from unnecessary work and additional costs for restoration. The remaining walls and ceiling can be tightened with masking tape if work is carried out with only one wall.

The first stage includes a thorough examination for damage that could appear during its operation or over time, defects that could appear during its construction and plastering. For the best determination of all unpleasant nuances before this, the wall must be thoroughly washed with a special washing machine under pressure. If you don’t have a car, then soapy water and a stiff brush will do. With it, all cracks clogged with dust will be opened, which will then need to be repaired.

Prevention of flaws on the walls inside is carried out by gypsum plaster without the addition of cement, if the work is done outside, then you need to use a liquid sand-cement mortar (it has significantly higher performance characteristics). Mashing of defects is carried out with a trowel, a suitable spatula or a soft construction brush. Alignment occurs flush with the wall so that there are no protrusions that in the future will violate the aesthetics of the last layer.

There are times when the wall is very old or built with significant deviations in technology. During operation, very deep defects could appear on it, which cannot be eliminated by carrying out preventive maintenance. In this case, it is desirable to completely cover with a layer of plaster. For this, a reinforcing mesh (polymer or metal) is attached. It can be fixed with dowels, adhesive-fixative or the same mortar with which you will plaster. This will allow the plaster to hide under it all the flaws of the concrete wall.

Moisture insulation

After your wall becomes flat and without damage, you need to make sure it is isolated from moisture. If it is not protected from water or steam, the coating may deteriorate soon. To do this, for one day it should be sealed as tight as possible with a thin plastic film. If the wall “breathes” moisture, then condensation will soon form under it. It is not suitable for further decoration, but requires the application of an additional insulating layer.

They can serve as an ordinary sealant for concrete, which is widely presented in modern building stores. It is advisable to apply at least two layers, each applied to the well-dried previous. This will not allow moisture to enter the room and spoil the decor. After a day of drying of the sealant, the wall is completely ready for subsequent paint.

Painting

How to paint the walls, for example, on the balcony? For indoor work, you can use paint, which performs only decorative functions. It does not require high operational, insulating properties, it should only lie well on the prepared surface. If the work will be carried out on external walls, it is recommended to use acrylic-based paints or oil options (the latter should preferably be applied to places where direct sunlight will not fall, otherwise they will quickly lose their original color).

It is possible to apply paint over a large area with a roller or pneumatic sprayer, however, hard-to-reach places - near the floor, in the corners and under the ceiling - are still recommended with a brush. This will avoid gaps in a continuous layer of paint, more carefully paint over all places where it is difficult to get a roller. For the most durable structure, you can use a last coat of paint sealant. It will allow the paint to more firmly grasp on the surface, increase its strength and wear resistance.

Output

Painting concrete walls has a number of undeniable advantages over other finishing methods. It is relatively cheaper, simpler, correctly painted, they will last you a very long time, they are easy to care for, repairs last quite quickly - it will take only a few days to dry all layers. Before proceeding with the preventive repair, many years will pass. Cosmetic intervention itself will be minimal - to clean up exfoliated places and re-tint them.

Even good paint can be much cheaper than other finishes. It also requires a little - based on the previously measured area, and finding a container with the indicated flow rate, you will reduce costs to a minimum.

Video

From the video you will learn how to trim a cold balcony quickly and beautifully.

Many believe that painting the balcony is the simplest thing that can be among all types of finishes. But is it? Not really. Each type of work is different from each other and has its own difficulties. Wall painting also has its own characteristics. For example, many face the following problem: how to choose the right paint for the balcony? Which of all types is better? And how to perform the process in a quality manner? In addition, it is important to be aware of the difference in coloring the balcony inside and out. The requirements for them are completely different.

Let's take a closer look at this topic in order to make the decoration of the balcony with high-quality, beautiful and durable paint.

The difference between the outer paint and the inner

Let's start with this, since you need to understand the requirements for the product from the outside and from the inside. If we talk about the internal painting of the balcony, then the material must first be environmentally friendly, so as not to harm the residents of the apartment or house. Since there are no rains and other negative atmospheric precipitations indoors, the paint can be taken inexpensively, without much resistance to weather events. Such paint should look beautiful, hide all the minor imperfections of the walls and delight your eye.

As for coloring on the outside, the coating requires a special approach. The paint should be highly resistant to weather conditions. It should not wash off after a few rainy days. Good adhesion, wear resistance and moisture resistance are important. But, it also happens that the balcony is sheathed with siding or corrugated board. They already have a finish coat. But, during the operation, they may need to be tinted. If we talk about the specific form of paints, then you need to build on a specific type of coating. Let's look at how the surface to be painted affects the choice of paint.

Decking coloring

If the balcony is sheathed with panels, then it is better to remove them and perform painting in the room. Immediately before work, you should prepare a profile: clean the places with rust with sandpaper, remove greasy stains with alcohol or thinner, repair scratches and prime the sheet. As for the paint for corrugated board, we recommend choosing from this list:

  1. Alkyd compound.
  2. Acrylic paints.
  3. Polyurethane products.
  4. Epoxy paint.

You can achieve maximum quality using a spray gun.

PVC panel coloring

PVC paneling is a fairly common occurrence for a balcony. But over time, they can fade, lose their color and look not presentable. To process such panels, you need to use a special composition. For example, acrylic paint from the Galamix line is suitable. Feature of the paint: wear resistance, immunity to sunlight and dirt.

Before painting, the panels are degreased with a solvent or alcohol. Note that paint can make panels darker than the original color. But, this is not entirely good, since dark colors will attract the sun's rays and heat up, which will lead to a decrease in the service life of plastic.

Chipboard staining

Many have old apartments, the so-called "Khrushchev", in which the balcony is sheathed with chipboard slabs. Or you have a loggia, which is also sheathed with such panels on top of a concrete parapet or brickwork. Painting them is simple, because many had to do with wood.

The first step is cleaning, after which the surface is degreased and a primer is applied. All defects and defects are eliminated by puttying. As for the paint, then choose from acrylic or oil formulations. Application is possible with a roller, brush or spray gun.

Brick Masonry Painting

Often, facing a balcony comes down to simply painting the brickwork. This is a popular solution in Western countries. Strictly, naturally and without unnecessary worries. For such work, the main thing is to do the preparatory work correctly. Everything can be divided into the following stages:

  1. To begin with, remove all dirt and excess solution from the walls of the balcony. Use a spatula and a metal brush.
  2. Putty seams between bricks.
  3. If fungus or mold has formed on the bricks, it will be removed by special means.
  4. Smooth the walls using an acrylic emulsion with antibacterial properties.

After that, you can start painting the walls. Suitable paint - water-based for outdoor use. The use of oil-based formulations is not recommended. The thing is that the tree has the ability to breathe, creating a beneficial microclimate on the balcony or loggia. Oil paint will create a crust, due to which this property will disappear. The material will gradually break down. Therefore, the best option is a water emulsion. It is suitable for both indoor and outdoor use.

This type of paint is available exclusively in white. Therefore, if you want to give it a different color, use special dyes - colors. They will give the emulsion paint the desired color. You can buy them in the same hardware store where paints are sold. The pigment must be added to the paint, gradually stirring. After that, you can carry out painting work with the same brush, roller or spray gun.

Lining coloring

Lining is wooden planks that look beautiful anyway. Wood is an environmentally friendly and beautiful material that will only enrich your balcony or loggia. In fact, the idea of \u200b\u200bpainting such a surface is not a good idea. But, the structure of the lining on the balcony can be emphasized and made even more expressive. What is this about? On stain painting and varnishing. The paint itself will not hide the structure of the tree, but will only improve it, creating a certain shade. It remains to choose a tone that you like and paint the surface.

Note!   Before painting, the tree is best treated with antiseptic agents.

Then, after drying, all this beauty must be varnished, protecting the surface, and giving it charm and brilliance. The loggia or balcony so finished will delight you and your guests. The room can be converted into an office, living room or lounge.

Drywall staining

Drywall is perhaps the most common option for finishing a balcony. It is easy to work with, and the result is a flat surface, ready for any further cladding. So, after you have covered the balcony with plasterboard, you need to perform a series of preparatory work before painting.


You can not be limited to banal coloring of the walls of the balcony. Use stencils or structural rollers. So you can diversify the room, making it original. And if you are completely confident in your drawing abilities, you can show them on the walls of the balcony.

Paint requirements for a balcony

Since the balcony is a special room, the paint for the balcony must meet certain requirements. What are they like?

  1. The balcony has rather large windows, so a lot of light penetrates there. The paint must have high resistance to ultraviolet, not fade or crack.
  2. You can use the balcony as a living room. It is important that the material is not toxic, does not emit harmful substances and is odorless. Environmental friendliness comes first.
  3. To repaint the walls do not have to several times, it is better to choose a paint with high wear resistance and long-lasting.
  4. Resistance to moisture is an important factor. For leaving it is necessary to wash a surface. Use that paint which is not washed away.
  5. Pay attention to the price. You should not buy expensive products if you cannot afford them. Focus on the optimal options, and use expensive paint to decorate the interior rooms.

Comfort in the apartment should be not only in the rooms, but also in other rooms. You can create comfortable conditions with your own hands, for example, for a simple update, painting the balcony is suitable. To do this, you need to know which paint is suitable.

You can create coziness with your own hands, for example, painting is suitable for a simple upgrade.

Of great importance in choosing a paint is the surface to be painted. Concrete fencing does not require prior preparation before painting. Using building material, minor damage is eliminated. It is necessary to remove the deposits of moss and algae with an alkaline solvent.

If the concrete balcony had already been painted before, then before painting it is necessary to remove the old paint from the surface in places where it peeled off and cracked. Be sure to make sure that the old coating is compatible with the new one, for this you need to paint a small area and wait a bit.

To paint the balcony you will need:

  • brush;
  • roller;
  • sandpaper;
  • primer paint;
  • anticorrosive agent;
  • paint.

What paint is suitable for work

You can’t save on the quality of the material, because the final result of the work and the appearance of the walls depend on how high-quality and fresh the paint will be.

For painting, azure and silicate and plastic-based paints are suitable, which are suitable for painting concrete surfaces. It is important to note that in strong sunlight the work is impractical, as everything will be damaged under the influence of sunlight.

If there is a plastic finish, then the panels are best removed to clean them from accumulated dust and dirt. To clean the panels, it is best to use alcohol or a nitro thinner. Plastic panels are painted with varnish, which should not be too dark, otherwise the panels may become deformed when heated in the sun. The varnish is applied using a spray gun.

Painting with aluminum cladding is the easiest. The work is not difficult, but noticeable. The updated look immediately catches the eye. Although not everything is so smooth. If the metal is of poor quality, then it will rust and require regular painting. To avoid this, before painting, the metal must be treated with a sandpaper and primer should be used for painting. To smooth the surface, you can use a special varnish, which will serve as an anti-corrosion agent. What should be the varnish? For painting metal structures, various types of varnishes are used: acrylic, alkyd, epoxy, polyurethane.

The inner part can not only be painted, but also decorated with all kinds of patterns, using the same paint.

Work stages

Before starting the painting, the frame should be thoroughly cleaned of dust and dirt, and then thoroughly dried. The frame is covered with linseed oil in two layers, and after drying - with one layer of soil. If bumps suddenly appear on the ground, they must be putty and thoroughly cleaned with sandpaper.

If a person does not know how to properly paint, how to use a roller and other tools for painting, then this work is best to entrust to specialists who understand this even a little. Although almost any man can do this job without difficulty, and a woman too.

Wall painting used to be very popular, because there was no other alternative. Now they use this method, since it is quite fashionable recently. But for everything to be beautiful and neat, you need to do everything right, you need to paint not only well, but also observing a certain action plan.

The main task of painting is to obtain a flat surface that will be pleasing to the eye for a long time.

In order for the work to turn out to be of high quality, preliminary preparation is necessary before staining.

Before you begin to work, you need to stock up on the necessary tools and materials. It is important not to forget that, in addition to paint, you need to buy brushes, a roller, adhesive tape, putty and other necessary materials.

We determine what color we will paint, and get the right paint. It is important to remember that a wide selection of paints is presented in stores and it is very difficult for an inexperienced buyer to choose one of them. Oil paint is very popular among all, but for the balcony you can use acrylic or water-based.

Preparing walls for painting. First you need to remove the old paint (if available on the walls) or wall covering (wallpaper, for example). It is important to remember that painting should not only make the appearance more beautiful, but also protect the walls from all kinds of adverse factors. Preparation is needed regardless of what paint the wall will be painted in the future.

After the walls are freed from excess, it will be necessary to grind this surface. To do this, you just need putty (which is purchased in advance at stage 1). In order to hide all the flaws, mask the cracks, putty is applied in several layers. When the putty is applied to the wall, it needs to be polished and primed, which can also be used before the putty to ensure the best adhesion of the materials used to each other.

Staining. When choosing a paint for work, it is necessary to take into account the conditions in which the painting will be carried out (the presence of drafts, room temperature, etc.). For example, the presence of drafts and high temperatures will contribute to faster drying of the paint, which is not always good, because because of this, unevenness on the wall may appear.

High humidity or dryness of the room can adversely affect staining. The staining process itself should not be very difficult. First you need to lay a wooden or any other floor, so as not to stain it with paint, using adhesive tape it is worth gluing all surfaces that will not be treated with paint. So the work will be done faster, more accurately, and even time can be saved on cleaning after work. They start painting the wall from the window, moving counterclockwise. It is more convenient to apply paint with a roller, since it immediately paints a vast surface. To paint over small details, it is better to use a brush.

When the balcony is painted, it remains to wait until the paint is completely dry, and remove all unnecessary.

https://youtu.be/czxhZsdwrls

As with the implementation of work of any complexity, the masters and specialists have their own little secrets that help in the work. There are several secrets to staining.

  1. If possible, it is advisable to insulate before painting, then it will be not only beautiful, but also warm, and you will not have to do the same work several times.
  2. To make it more convenient to paint, absolutely everything must be removed from the balcony.
  3. Before painting, putty is applied to the walls, which not only eliminates bumps, but also improves the adhesion of the surface to the paint.
  4. Cleaning the surface before painting is a mandatory stage of work, otherwise the paint will lie in uneven layers and the new look will not be better than the old one.
  5. When painting the outside, it is advisable to use a roller with a long stick, so work will be safer. It is important to remember that it is life-threatening to climb outside yourself. If there are no skills, it is better to hire specialists who will paint using insurance and other equipment.
  6. To create beautiful patterns, you can use all kinds of stencils that can be cut independently or purchased in the construction department.
  7. Normal drying of the paint occurs in warm weather.

You will also be interested in:

Assembly of built-in drywall shelves in the wall
  Tsugunov Anton ValerievichTour time: 5 minutes The modern design of the premises is often not ...
House with a bathhouse under one roof: advantages, projects and construction technology
  Do you want to make a bath in the house? Be prepared to meet serious requirements and ...
Painting the facade of the house: tips and tricks
  The easiest way to update the exterior walls of the house and give them uniqueness is ...
Gooseberries: post-harvest care
  Trimming gooseberries is not a whim of perfectionist gardeners, but the most important procedure, from ...
Dressing room in the hallway: varieties and beautiful examples
  If you have empty niches in your home, you can fill them with built-in wardrobes ....